Water that is allowed into a home has to have a way to leave after being used. Plumbing, the mechanism by which this happens, is an essential basis of home construction. A proper plumbing system when in place, will ensure that the flow of water is seamless, with maximum usage, minimum waste and absence of leaks.
We often think that plumbing requires lots of pipes, lines and connections, and is therefore complicated. On the contrary, there are only two systems in place;
- A potable water supply that provides your home with its freshwater needs.
- A drainage system that removes wastewater from the home.
Plumbing and Drainage Principles
Plumbing and drainage systems in homes never intersect and run on common basic principles:
- The main inlet system with water delivered by local municipality, borewells or a water harvesting unit. This water flows through various fixtures to different rooms for different purposes.
- Used and wastewater then gets collected into drains at various points across the home. They flow through small lines, get into larger ones and are then re-directed to a sewer system, water treatment plant or drain gutters.
Potable/ Freshwater System
Components of this potable/freshwater System
Underground hidden connections supply fresh water to the home. Water supplied by the main municipality pipeline connects to a shutoff valve which is directly connected to individual homes and stored in tanks. Water is then led through another series of pipes throughout the home, snaking behind walls, under floors and conveyed to faucets.
2. Shutoff Valves
The main potable water supply is monitored through shut-off valves. Smaller valves control water flow in faucets like sink and bathroom taps. These valves can be shut when maintenance or repairs are carried out in case of water seepage or leakage. Every area of a plumbing network has its own shut off valve which can be used to stop water flow completely.
3. Water Meter
Before the home gets its freshwater supply, pipes pass through a water meter outside the home. This determines monthly usage and costs if the water is received from the municipality.
Knobs and faucets control water flow. Hot and cold knobs in sinks and bathrooms pass water through two different pipes.
Also called the second plumbing system, drains collect waste, used water and remove it from the house, taking it to either sewage or a water treatment plant. The used water is pushed through outgoing pipes that connect to public drainage systems.
Components of drainage systems
1. Drain Pipes
Any plumbing fixture in the home also features drains with drainage pipes. These pipes have a downward angle, enhancing water flow. Wastewater is carried out through these pipes and then passed through the inter-connected underground sewer line. These pipes lead to a water treatment plant or a public septic system.
2. Drain taps
Taps are installed in drains to prevent backflow. This U-shaped pipe sits just below a drain, connecting other drainage pipes. Also called a ‘P’ trap, the pipe holds water and prevents foul gases from seeping back into the home.
3. Drain Vent
The drainage system carries liquid and semi-solid waste that has to maintain proper movement. Drain vents are fitted into roofs of homes and release air into drain pipes. This vent must be clear of debris to prevent blockage and backflow.
Understanding how plumbing works in your home will help you locate the exact leaking or seepage points in case of any malfunction, breaking or damage. It will also ensure that water flows in and out of the house constantly, or issue can be identified and repaired quickly when adequate and timely maintenance is undertaken. The designers at Homelane recommend using high-quality fittings that are durable and help you avoid many of the plumbing issues mentioned above. Get in touch with us today, and we shall be happy to design your dream home.